Description
This indicator allows you to use a calculation function for the measured value
Ax+B+Cx-1
The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement)
Coefficients A,B and C are freely definable. X = displacement of the plunger
Analogue bar graph in the display (14 different scales switchable)
GO/±NG tolerance judgement function
MAX/MIN/RANGE function to measure peak values
A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
Easy indicator setup via a setup menu
A USB interface box can be used to set up the indicator from PC via dedicated software
Range:
0.5"/12.7 mm
Digital step:
0,00005"/0,001 mm
Range:
0,5" Inch
Max. Permissible Error (Total Range):
0,0001"/0,003 mm
Hysteresis:
0,0001"/0,002 mm
H MPE (Hysteresis):
0,0001"/0,002 mm
Repeatability:
0,0001"/0,002 mm
Data output:
Yes
Mass:
285 g
Measuring force:
≤2,5 N N
Scale:
Capacitance type, ABSOLUTE linear encoder
Max. response speed:
Unlimited
Stem Ø:
8 mm
Contact point:
Carbide ball, thread M 2.5 x 0.45 mm
Alarm:
Counting value composition error, overflow error, tolerance limit setting error
Power supply:
5 - 24 V DC / 100mA (max)
Protection:
IP54
Display:
LCD, character height 8 mm
Max. response speed:
Unlimited
Measurement frequency (MAX/MIN/RANGE):
Standard mode: 100 times/s
(plunger speed max. 0.1mm/s for peak measurement)
Delivered:
With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end.
Counting direction switchable:
Yes
Signal output:
(+NG, OK, -NG):
Yes
Signal input:
No-voltage input,
(PRESET_RECALL/ZERO, HOLD_RESET):
Yes
ZERO/ABS:
Yes
GO/±NG judgement:
Yes
ON/OFF:
Yes
GO/±NG judgement via LED:
Yes
GO/±NG judgement on LCD:
Yes
MAX/MIN/RANGE:
Yes
Function lock:
Yes
PRESET 3x:
Yes
Analog bar resolution switchable:
Yes
Calculation function (with formula):
Yes
Digital/Analog:
Digital
Inch-Metric:
Inch/Metric
Type:
EN ISO Standard
Remarks: Center-lug back shown is optional
*VAT excluded. All products are intended to be sold to commercial customers.
Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
`
Cataloge: