Description
This indicator is the MAX/MIN/RANGE value holding function model
It offers the following benefits:
The MAX/MIN/RANGE (run-out value) can be measured
A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
Easy indicator setup via a setup menu
Analogue bar graph in the display (12 different scales switchable)
GO/±NG tolerance judgement function
This indicator enables the use of a calculation function for the measured value Ax
Coefficient A is freely definable and x = displacement of the plunger
A USB interface box can be used to set up the indicator from PC via dedicated software
Range:
0.5"/12.7 mm
Digital step:
0,00005"/0,001 mm
Mass:
170 g
Repeatability:
0,0001"/0,002 mm
Range:
0,5" Inch
Max. Permissible Error (Total Range):
0,0001"/0,003 mm
Hysteresis:
0,0001"/0,002 mm
Data output:
Yes
H MPE (Hysteresis):
0,0001"/0,002 mm
Measuring force:
≤ 1,5 N
Scale:
Capacitance type, ABSOLUTE linear encoder
Max. response speed:
Unlimited
Stem Ø:
9,52 mm
Contact point:
Carbide ball, thread # 4-48 UNF
Alarm:
Low voltage, ABS composition error, overflow error, tolerance limit setting error
Power supply:
1 battery CR-2032
Battery life:
Standard mode: approx. 1 year
fast mode: approx. 4.5 month
Display:
LCD, character height: 8 mm, rotatable 330°
Protection:
IP42
Max. response speed:
Unlimited
Measurement frequency (MAX/MIN/RANGE):
Standard mode: 10 times/s
fast mode: 50 times/s
(plunger speed max. 50 µm/s for peak measurement)
Delivered:
Including 1 battery
Counting direction switchable:
Yes
Low voltage alarm:
Yes
ZERO/ABS:
Yes
GO/±NG judgement:
Yes
Digimatic data output:
Yes
ON/OFF:
Yes
Lock function:
Yes
Fast measurement mode:
yes
Function lock:
Yes
MAX/MIN/RANGE:
Yes
PRESET 3x:
Yes
Analog bar resolution switchable:
Yes
Calculation function (with formula):
Yes
Power supply report:
UN 38.3 Test Summary Report
Digital/Analog:
Digital
Inch-Metric:
Inch/Metric
Type:
ASME/ANSI/AGD Standard
Remarks: Center-lug back shown is optional
*VAT excluded. All products are intended to be sold to commercial customers.
Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
`
Cataloge: