Description
This provides all-in-one surface roughness and contour measurement within one drive unit.

The Formtracer CS-3300 offers you the following benefits:
You can carry out simultaneous analysis of roughness and contour with one measurement.
It performs roughness analyses conform to various international standards (EN ISO, VDA, ANSI, JIS and customized settings).
It gives you the best measuring condition with a vibration stand as standard.
The high drive speed reduces the total measurement time.
The detector unit can be extended to avoid interference between the drive unit and workpiece.
Granite base size
(WxD) [mm]:
600 x 450
Vertical travel
[mm]:
500
Traverse:
200 mm
Measuring range:
Z1 = 5 mm
(Up to 10 mm with an optional stylus)
Measuring speed:
0.02 - 30 mm/s
Drive speed:
X: 0 - 80 mm/s; Z2: 0 - 30mm/s
Traverse straightness:
X = 0.2 µm / 100 mm
X = 0.6 µm / 200 mm
Inclining range:
±45°
Accuracy:
X = (0,8+0,015L) µm [L : Drive length (mm)]
Z1 = (1,5+I2HI/100) µm [H : Measurement height from the horizontal position (mm)]

Software:

FORMTRACEPAK
Allows control of all axis, optional motor-driven Y-axis table and rotary table for efficient automated measurement.
Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard.
An inspection certificate can be created by setting the print format as required.
Inch-Metric:
Inch
Measuring range:
Z1 = 5 mm
(up to 10 mm with an optional stylus)
Base material:
Granite
Mass:
150 [kg]
*VAT excluded. All products are intended to be sold to commercial customers.
Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
`
Cataloge: