Description
These are four economical Rockwell hardness testing machines to suit practically every application you need.
The Rockwell HR-200/300/400 offers you the following benefits:
The newly designed frame provides maximum clearance for positioning the work piece, all you need is a flat table for mounting these testing machines.
They are very simple to operate: the analogue type HR-210 uses an automatic presetting dial gauge.
Digital models HR-430MR/MS use automatic steering wheel braking and load sequencing for easy handling.
Digital models HR-320MS and HR-430MR/MS can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.
You can perform Brinell hardness tests by using the following optional accessories:
a Brinell indenter, a weight set and a measurement microscope.
Model:
HR-210MR
HR unit resolution:
0,5 HR
Jominy-test capability:
Additional accessories required
Workpiece clamping device K543817 capability:
Serial
Anvil adaption:
Ø 19mm
Max. specimen height:
180 mm
Throat depth:
165 mm
Max. specimen weight:
20 kg
Approx. mass main unit:
47 kg
Height:
Max. 180 mm (100 if cover is attached) mm
Measuring depth:
Max. 165 mm (from the center of the indenter axis)
Functions:
To observe the hardness number within 0,2 HR of the scale unit, as required by ISO 6508-2, the displayed result is to be judged by the dial hand width within the step of the dial gage scale.
Standard:
JIS B 7726, ISO 6508-2
Preliminary test force (N):
98,07
Test force Rockwell (N):
588,4; 980,7; 1471
Rockwell Scale Diamond:
HRA; HRD; HRC
Rockwell Scale Ball 1,5875 mm:
HRFW; HRBW; HRGW
Rockwell Scale Ball 3,175 mm:
HRHW; HREW; HRKW
Rockwell Scale Ball 6,35 mm:
HRLW; HRMW; HRPW
Rockwell Scale Ball 12,7 mm:
HRRW; HRSW; HRVW
Description:
The HR-210MR is an economical Rockwell hardness testing machine to suit practically every application you need. The MR indicates the Rockwell testforce range.
It offers you the following benefits:
The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.
Its outstanding robustness makes it perfect for even the roughest environments.
You can attach the clamping device K543817 to for safe operation with hard to handle workpieces.
The analogue type HR-210MR uses an automatic presetting dial gauge which makes it easy to operate.
You can perform Brinell hardness tests, as indicated, by using the following optional accessories:
a Brinell indenter and a measurement microscope.
Resolution:
0,5 HR graduation
Test force selection:
Manual weight exchange
Test force application:
Semi-automatic
Test force duration:
Fixed 3-5-5 sec. or manual
Display Unit:
Analogue dial indicator
Main unit dimensions:
214x512x780mm
Brinell Scales indentation only Ball 1,0 mm:
HBW 1/10; HBW 1/30 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
Brinell Scales indentation only Ball 10,0 mm:
HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
Gross Weight:
69000 [gram]
Standard accessories:
810-039 Flat anvil Ø64mm
810-040 V-anvil outside diameter Ø40mm groove width 30mm
11AAB941 Water level
383876 Vinyl cover
357651 AC adaptor

Indenters, reference materials and power cord not included
Net weight:
45600 [gram]
* Models which can be connected to the MeasurLink measurement data network system are only HR-320MS, HR-430MR
and HR-430MS.

*VAT excluded. All products are intended to be sold to commercial customers.
Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.





`
Cataloge: